Torlife™ Ultimate AG protects against the spread of flame to Class O on new/bare or stripped walls and ceilings.
The topcoat is a high performance anti-graffiti finish which provides protection against serious abuse by allowing long-term effective removal when used in conjunction with the Tor graffiti removal systems.
Aqualife™ WSE Primer (EP131), a two-pack adhesion promoting primer for new, bare or stripped surfaces.
Torlife™ Ultimate Intermediate (EM369) single-pack coating that adds colour and fire protection into the system.
Torlife™ Ultimate AG (EM240) a two-pack, solvent free coloured finish with outstanding graffiti removal properties.
Internal plaster and plasterboard, brick, masonry, concrete and ceramic tiles.
Torlife™ Ultimate AG is suitable for any internal surfaces where effective protection against graffiti is needed in conjunction with a high level of fire protection, but typical areas include walls, ceilings and soffits in the following locations;
Graffiti can be safely and easily removed from all of the Tor Coatings anti-grafitti range by using theTorclean™ Pre-Wipe (SS454001) and Torclean™ Graffiti Remover Wipe (SS455001) or by using the Torclean™ Graffiti Pre-Wash (DM416) and the Torclean™ “G” Graffiti Remover (DM424).
Only Tor Coatings remover wipes and sprays should be used as other materials may damage the painted surface, resulting in system failure and permanent graffiti damage.
The use of abrasive pads and household detergents should never be considered unless otherwise instructed by a representitive of Tor Coatings Ltd.
The following specification is included for demonstrative purposes only, and would be suitable for a new or bare surface. Always consult a representative of Tor Coatings prior to specifying or applying.
Aqualife™ TP WSE Primer
By brush or medium pile roller, apply one full coat of Aqualife™ TP WSE Primer (EP131) at a theoretical coverage rate of 10 square metres per litre. Allow to cure. Overcoating time minimum 16 hours, maximum 7 days.
Torlife™ Ultimate Intermediate
By brush or medium pile roller, apply one full coat of Torlife™ Ultimate Intermediate (EM369) at a theoretical coverage rate of 10 square metres per litre. Allow to cure. Overcoating time minimum 16 hours, maximum 7 days.
Torlife™ Ultimate Finish
By brush or short / medium pile roller, apply one full coat of Torlife™ Ultimate Finish (EP240) at a theoretical coverage rate of 15 square metres per litre. Allow to cure.
Tor Coatings offers a free site survey service and all of our Area Business Managers are fully trained and able to carry out full site assessments. A detailed and bespoke specification will then be issued.
Contact Tor Coatings on 0191 410 6611 to arrange your free site survey.
Tor Coatings’ national team of Area Business Managers is supported by a dedicated customer services team, a team of experienced paint chemists and a dedicated technical help desk. Call 0191 411 3148 for assistance from our helpdesk or visit www.tor-coatings.com to find out more.