Torcure™ MC systems are single pack moisture-cured polyurethane floor coatings. The products are solvent based and exhibit fast cure times. The cured films are chemically resistant and represent the hardest finishes available from a single-pack formula.
The products are easy to apply and maintain and provide decorative as well as functional surface finishes. Slip resistant floor finishes can be created by the addition of grits into the coatings during application.
1st Coat – Torcure™ MC Binder/Sealer (PU885).
2nd & 3rd Coats – Torcure™ Floor Finish (PU840).
Typically used on new or previously painted concrete or timber floors*.
* A compatibility check with existing coating is recommended.
• Factory floors
• Distribution Units
• Any Industrial building which needs a tough floor finish
The following specifications are included for demonstrative purposes only. Always consult a representative of Tor Coatings prior to specifying or applying.
Torcure™ MC Floor Finish System:
Porous or Friable substrates: Apply 1 coat Torcure™ MC Binder / Sealer (PU885), 2 coats Torcure™ MC Floor Finish (PU840).
Previously Painted: Existing coatings must be sound, firmly adhered and suitable for coating (apply test areas if necessary). Remove all loose and flaking paint back to a ‘tight’ area and ‘feather’ edges. Thoroughly abrade existing coatings. Apply 2 coats Torcure™ MC Floor Finish (PU840).
Torcure™ MC Lacquer System:
Bare, Porous or Friable substrates: Apply 1 thinned coat of binding primer (20% addition of TH99) Torcure™ MC Floor Lacquer (PU888), 2 coats Torcure™ MC Floor Lacquer (PU888).
Existing lacquers must be sound, firmly adhered and suitable for coating (apply test areas if necessary). Remove all loose and flaking lacquer back to a ‘tight’ area and ‘feather’ edges. Thoroughly abrade existing coatings. Apply 2 coats Torcure™ MC Floor Lacquer (PU888).
Tor Coatings’ national team of Area Business Managers is supported by a dedicated customer services team, a team of experienced paint chemists and a dedicated technical help desk. Call 0191 411 3148 for assistance from our helpdesk or visit www.tor-coatings.com to find out more.