Tordeck™ Balcony Coating System

Overview


Tordeck™ is a fast-curing, hardwearing balcony coating system, designed to waterproof and provide slip resistance to balconies and walkways.

Tordeck™ is suitable for external walkways and balconies, usually found in communal areas, landings, access areas and escape routes in social housing blocks. It has also been specified for balconies and walkways in hotels and hospitals, access areas in car parks and walkways and escape areas in shopping centres.

 


How it Works

 

Typical build-up of the Tordeck™ System

Main WalkwayTordeck Balcony Diagram 1

A – Prepared existing substrate 

B – Tordeck Fast-Set Primer 

C – Tordeck™ Walkway Gritcoat

D – Tordeck Walkway Topcoat

Edge system

B – TordeckFast-Set Primer

E – Tordeck Edge detail basecoat

F – Tordeck Edge detail topcoat

The system is specifically intended for use on medium to high wear areas on communal balconies and walkways. Typically, such areas will consist of bare concrete or asphalt.

Key features and Benefits 

  • Fast curing, anti-slip coating system
  • Walkable after 2-3 hours, so little disruption to occupants
  • 2-3 coat seamless waterproofing membrane
  • Easy to apply and detail
  • Low textured, slip resistant finish
  • Long term durability
  • Colour choice available



Frequently Asked Questions


Primer

Tordeck™ Fast-Set Primer is a two-pack primer tolerant of entrapped air/moisture in concrete or asphalt decks etc.

Basecoat

Tordeck™ Basecoat for level balconies. A two-pack embedment coat with anti-slip grits added to the wet resin.

Topcoat

Tordeck™ Walkway Topcoat. A two-pack, low odour resin designed to seal and encapsulate grit layer.

Edge System

Comprised of Tordeck™ Fast-Set Primer, Tordeck™ Embedment Coat / Embedment Coat (Fibretex) and Tordeck™ EDT two-pack, low odour resin Topcoat.

Substrates

The system is specifically intended for use on medium to high wear areas on communal balconies and walkways.  Typically, such areas will consist of bare concrete or asphalt.

Buildings

Tordeck™ is suitable for external walkways and balconies, usually found in:

• Communal areas, landings, access areas and escape routes in social housing blocks

• Balconies and walkways in hotels and hospitals

• Access areas in car parks

• Walkways and escape areas in shopping centres

• Unrivaled expertise and knowledge

• Nationwide team of area managers and technical personnel

• Free site survey of your building

• Free comprehensive specification writing service (NBS format also available)

• On site technical back-up for live projects

The following specifications are included for demonstrative purposes only. Always consult a representative of Tor Coatings prior to specifying or applying. All areas should be suitably prepared according to the detailed Tor specification, prior to application.

Tordeck™ Fast-Set Primer

Ensure surfaces are clean and dry before priming. Apply 1 coat of Tordeck™ Fast-Set Primer (RC564) and allow to cure for at least 1 hour before applying the Basecoat.

Tordeck™ Walkway Gritcoat
Ensure surfaces are clean and dry. Apply one coat of Tordeck™ Walkway Gritcoat (RC565). Allow to cure for a minimum of 2 hours before applying the Topcoat.

Tordeck™ Walkway Topcoat
Ensure surfaces are dry. Apply 1 coat Tordeck™ Walkway Topcoat (RC559)

Tor Coatings’ national team of Area Business Managers is supported by a dedicated customer services team, a team of experienced paint chemists and a dedicated technical help desk. Call 0191 411 3148 for assistance from our helpdesk or visit www.tor-coatings.com to find out more.

Can’t find what you are looking for?


Click here to contact us or call us today on 0191 410 6611



tordeck

Get in touch

Click here to arrange a FREE site survey
or call us on 0191 410 6611