Duraclean™ WBU


The Duraclean™ WBU paint system provides an extremely hardwearing, long-lasting, decorative finish combined with a Class 0 fire rating when applied to new, bare or stripped surfaces.

In the event of a fire, the Duraclean™ WBU coating system inhibits the surface spread of flame across the painted surfaces.



  • 3 coat system
  • Tough Eggshell Finish
  • Achieves Class 0 fire rating on new, bare or stripped surfaces
  • Independently tested by Warrington Fire
  • Easily applied by brush and roller
  • Colourcoat available in a wide range of NCS, BS4800 and RAL colours, from a in-can tinting system

Frequently Asked Questions

1st Coat

Aqualife WSE Primer (EP131), a two pack adhesion promoting primer for new, bare or or stripped surfaces.

2nd & 3rd Coat

Duraclean™ WBU Eggshell Finish

(EM331), a single pack water-based Urethane Coloured Finish.

Normally applied to new, bare or stripped internal surfaces including the following: Plaster, plasterboard, masonry, brick, concrete and ceramic tiles.


Duraclean™ WBU is suitable for any internal surfaces where a durable and cleanable finish is needed in conjunction with a high level of fire protection, but typical areas include walls, ceilings and soffits in the following locations;

  • Communal areas, landings and lift lobbies in social housing blocks
  • Internal fire escape areas
  • Internal public access areas
  • Toilet blocks in schools and public conveniences
  • Corridors and escape routes in public buildings including schools, colleges, hospitals, nursing homes, leisure centres, community centres and office blocks
  • Unrivalled expertise and knowledge
  • Nationwide team of area managers / technical personnel
  • Free site survey and risk assessment
  • Free specification service (NBS format also available)
  • On-site technical back-up on live projects
  • RIBA CPD seminar ‘Understanding the control of rapid flame spread in building refurbishment’ available

The following specifications are included for demonstrative purposes only. Always consult a representative of Tor Coatings prior to specifying or applying.

All areas should be suitably prepared according to the detailed Tor specification, prior to all application.

Aqualife™ WSE Primer (where required)

Apply 1 coat of Aqualife™ WSE Primer (EP131) and allow to cure overnight before overcoating.

Duraclean™ WBU

Apply 2 coats of DuracleanTM WBU (EM331), allow 1st coat to cure (minimum of 4 hours) before overcoating.

Tor Coatings offer a free site survey service, and all of our Area Business Managers are fully trained and able to carry out full site assessments. A detailed and bespoke specification will then be issued.

Contact Tor Coatings on 0191 410 6611 to arrange your free site survey.

Tor Coatings’ national team of Area Business Managers is supported by a dedicated customer services team, a team of experienced paint chemists and a dedicated technical help desk. Call 0191 411 3148 for assistance from our helpdesk or visit www.tor-coatings.com to find out more.

Can’t find what you are looking for?

Click here to contact us or call us today on 0191 410 6611


Get in touch

Click here to arrange a FREE site survey
or call us on 0191 410 6611